SOLVENT_TL: flow condition to initialize a study with constant pressure and saturations

In the Solvent model the solution variables are: oil pressure, oil saturation, gas saturation/bubble point, solvent saturation and temperature. To initialize a study with constant pressure, saturation and temperature, four Dirichlet conditions can be applied.

If the oil in place is saturated with reservoir gas, then the gas saturation must be used instead of the bubble point. See example below.

FLOW_CONDITION initial_press
  TYPE
    OIL_PRESSURE dirichlet
    OIL_SATURATION dirichlet
    GAS_SATURATION dirichlet
    SOLVENT_SATURATION dirichlet
    TEMPERATURE dirichlet
  /
  OIL_PRESSURE 200.0 Bar
  OIL_SATURATION 0.9999
  GAS_SATURATION 0.0001
  SOLVENT_SATURATION 0.0
  TEMPERATURE 15.0d0 C
/

If the oil in place is unsaturated with reservoir gas, then the bubble point must be used instead of the gas saturation. See example below.

FLOW_CONDITION initial_press
TYPE
  OIL_PRESSURE dirichlet
  OIL_SATURATION dirichlet
  SOLVENT_SATURATION dirichlet
  TEMPERATURE dirichlet
  BUBBLE_POINT dirichlet
/
OIL_PRESSURE 200.0 Bar
OIL_SATURATION 1.0d0
SOLVENT_SATURATION 0.0
TEMPERATURE 15.0d0 C
BUBBLE_POINT 100.0 Bar
/